Fiber

Fiber

produkt 9 av 23 produkter
Forrige Neste 

E-1040P - Central Control Unit for EFP fiber kamera system, SWIT

Klikk her for mer info!

 

4-ch Center Communication Unit

Legg til tilbudsliste Kontakt

Product Description

The CCU of SWIT Fiber Camera System
19" 1U includes 4 camera channels
Allow cascading for more channels
Offer Lemo or Neutrik input for option
Sony/Panasonic Camera Remote input
TALLY and return SDI input
Build-in Intercom control panel
Headset and Microphone input

Center Communication Unit (CCU):

SWIT Fiber Camera System includes the Camera adaptors and CCU as the main essential devices. E-1040P is the CCU, includes 4 camera channels input via Lemo or Neutrik cables, and with build-in intercom control panel.

 

Input and Output:

E-1040P CCU supports:
4x Lemo or Neutrik camera channel inputs
2x SDI outputs for each fiber channel
4x Remote control input (Panasonic or Sony)
1x Return SDI input
1x Return SDI loop output (for cascading)
1x Intercom cascading loop
1x TALLY input (DB9)

Complete EFP Application:

SWIT Fiber Camera System offers a complete EFP solution via Camera Adaptor E-4020 and the CCU E-1040P. The supported transmission includes:
Camera SDI to CCU
Switcher returned SDI to cameras
Full duplex intercom between cameras and CCU
TALLY signal from CCU to cameras
Camera remote control at CCU
Power distribution from CCU to cameras
 
Lemo / Neutrik Connector:

E-1040P CCU supports Lemo 3K.93C cable or Neutrik NO2-4FDW-A cable for optional. In this system, the Lemo/Neutrik optical fiber cable offers Max 20km transmission distance without power supply, and 300m transmission distance with 55W power distribution to camera (independent channels), by connecting with Power Station E-2010P. You can also directly insert LC pure optical fiber cables into Neutrik connector to achieve all communications except power supply.
Note: Lemo/Neutrik is not included with the product. 
Remote Control Input:

E-1040P CCU supports Camera Remote controlling input. Connect camera remote port to camera adaptor E-4020, and connect remote controller to CCU, so that you can control all the cameras in the system at CCU end. The remote control support both Panasonic and SONY cameras, and the RCU input port of E-1040P is 10-pin standard, you can directly connect with Panasonic remote controller, and E-1040P CCU also provides a conversion RCU cable to connect with SONY remote controller.

 
Return SDI and TALLY input:

E-1040P CCU supports Switcher return SDI and TALLY input and distributed to all cameras in this system. Use SWIT S-1071F(EFP) on-camera LCD monitor, you can see return SDI video of Pic-in-Pic displayed over local camera SDI video. The system provides a return SDI button to be fixed on tripod handle, and press the button will popup the PIP return SDI window, and release the button, the window disappears. The return SDI loop output Is for cascading another CCU if more than 4 camera channels are working.

 
Intercom Control Panel:

The front panel of E-1040P CCU integrated the intercom control panel, supports Full duplex intercom with all cameras in the system. Director can set private mode with particular cameras or broadcast mode to all cameras. The package offers both headset and goose neck microphone, for optional. For cascading mode, the E-1040P provides intercom link connection port to another E-1040P CCU.

 
Power Input:

E-1040P supports 12V and 48V power input. The 12V input powers only the CCU itself, and the 48V input can distribute power to all cameras in the system. By connecting with Power Station E-2010P, the CCU can supply MAX 90W power (each channel) at 100m distance via Lemo or Neutrik cables, and MAX 80W at 200m, MAX 55W at 300m, etc.

 
Standard Accessories:

E-1040P CCU provides the following essential accessories for you to build up system:
Headset ~1
Goose neck Microphone ~1
RCU conversion cable
(10pin-male to 8pin-female, 20cm) ~4
Intercom link cable ~1


 

Specifications:

Model E-1040P
Power Main AC/DC Input 30~48V
Backup AC/DC Input 7~17V
Max Power Consumption 13.0W
Input&Output Optical fiber Lemo 3K.93C or Neutrik NO2-4FDW-A (4 in total)
SDI output 3G/HD/SD-SDI x2 (8 in total)
Return SDI input 3G/HD/SD-SDI x1
Return SDI loop output 3G/HD/SD-SDI x1
Remote 10-pin x1 (4 in total)
SDI Format SMPTE-425M 1080P (60 / 59.94 / 50)
SMPTE-274M 1080i (60 / 59.94 / 50)
1080p (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-RP211 1080psf (30 / 29.97 / 25 / 24 / 23.98)
SMPTE-296M 720p (60 / 59.94 / 50)
SMPTE-125M 480i (59.94)
ITU-R BT.656 576i (50)
General Working Temperature 0°C ~ +40°C
Working Humidity 10% ~ 90%RH
Storage Temperature -20°C ~ +55°C
Storage Humidity 10% ~ 90%RH
Dimension 483x297x45mm
Net weight 3kg


Warranty Period: two years conditional.

 E-1040P 4-ch Center Communication Unit User Manual View E-1040P 4-ch Center Com



Fiber

E-2010P - Power Supply Unit for fiber system, SWIT

Strømforsyning for SWIT optisk fiber kamerasystem. Leverer strøm til sentralenheten og..

E-4020S - Fiberoptisk kameraadapter, V-Mount, SWIT

Gjør ditt studiokamera fiberbasert med dette kameraadapteret. S-4020S passer på kamerae..

Videokamera tilbehør*

E-5010 - Camera Remote Control Unit, for Panasonic/Sony, SW..

E-5010 is a Camera Remote Control Unit that universal compatible with SONY and Panasonic cameras, su..

Har du spørsmål til produktet?

Eller lurer du på noe annet? Send oss ditt spørsmål her og vi svarer deg innen få dager.

Kontaktinformasjon
Navn
E-postadresse
Telefon
Adresse
Postnr Poststed
Hva gjelder henvendelsen?


Tips en venn!

Bruk skjema under hvis du kjenner noen som kan ha interesse av dette produktet.

Mottaker
Fra E-postadresse
Til E-postadresse
Melding