Videomiksere

Videomiksere

produkt 15 av 104 produkter
Forrige Neste 

HDL-MULTIP6G/16 - Multiview 16 x SD/HD/3G/6G-SDI, Blackmagic

Klikk her for mer info!

 

Blackmagic MultiView 16 is the world´s first multi viewer that operates natively in Ultra HD, which allows you to use an Ultra HD monitor or television for twice the image sharpness, even if you are not even using Ultra HD in your facility yet! Now you can connect up to 16 different SD, HD and Ultra HD SDI sources into one display for monitoring! Blackmagic MultiView 16 allows 4, 9 or 16 views to be selected and each input includes a full frame re-synchronizer so you can have any combination of SD, HD and Ultra HD SDI sources connected, all at the same time!

Legg til tilbudsliste Kontakt

Blackmagic MultiView 16 is the world´s first multi viewer that operates natively in Ultra HD, which allows you to use an Ultra HD monitor or television for twice the image sharpness, even if you are not even using Ultra HD in your facility yet! Now you can connect up to 16 different SD, HD and Ultra HD SDI sources into one display for monitoring! Blackmagic MultiView 16 allows 4, 9 or 16 views to be selected and each input includes a full frame re-synchronizer so you can have any combination of SD, HD and Ultra HD SDI sources connected, all at the same time!

Connections
SDI Video Input
16 x 10-bit SD-SDI, HD-SDI and 6G-SDI.
SDI Video Loop Output
16 x 10-bit SD-SDI, HD-SDI and 6G-SDI.
Multi View Outputs
4 x SDI plus 1 x HDMI (2 x HD, 2 x 6G-SDI, 1 x HDMI), able to be used concurrently.
SDI Video Multi View Outputs
2 x 10-bit HD-SDI, 2 x 10 bit 6G-SDI.
HDMI Video Multi View Outputs
1 x HDMI type A connector. Output supports EDID of the monitor.
Reference Input
Black burst and Tri-level Sync for SD, HD and 4K.
Muti Rate Support
Auto detection of SD, HD or 6G-SDI. Simultaneous viewing of 4K, HD and SD video.
Updates
USB 2.0 high speed (480Mb/s) interface or via Ethernet.
Control
16 buttons for local control of MultiView 16. 5 buttons and scroll wheel for control of LCD display or RJ45 Ethernet.
Configuration
Via front panel LCD or use either RJ45 Ethernet or USB 2.0 for firmware updates and IP address setting.
RS-422 Control
1 x input for configuring layouts.
Reclocking
On all SDI outputs, auto switching between standard definition, high definition or 6G-SDI video.



Videoprosessorer*

FIBERBRIK OPTICALCON - Adapter for Cameraconverter til opticalCON DUO the..

Adapter for konvertering fra LC til opticalCon Duo på ATEM Camera Converter.

Har du spørsmål til produktet?

Eller lurer du på noe annet? Send oss ditt spørsmål her og vi svarer deg innen få dager.

Kontaktinformasjon
Navn
E-postadresse
Telefon
Adresse
Postnr Poststed
Hva gjelder henvendelsen?


Tips en venn!

Bruk skjema under hvis du kjenner noen som kan ha interesse av dette produktet.

Mottaker
Fra E-postadresse
Til E-postadresse
Melding