Magewell 64050 Pro Convert HDMI TX NDI Encoder

Magewell 64050 Pro Convert HDMI TX
Støtter opptil 2048 x 1200 60fps inngangssignaler
Kobler eksisterende kildeutstyr til NDI-aktiverte, IP-baserte medienettverk
Plug-and-play-brukervennlighet med automatisk gjenkjenning av inngangsformat og DHCP-nettverkskonfigurasjon

Inngangsfunksjoner
Støtte for HDMI-inngang på opptil 2048 x 1200 4:4:4/4:2:2 60fps
Støtte for 8-kanals IEC60958-lydstrømmer

NDI®-format
Støtte for opptil 2048x1200 60fps 4:2:2 8-bit NDI-koding
Send NDI-strømmer på tvers av nettverkssegmenter
Fjernstyr PTZ-kameraer via NDI
Støtte for NDI 6.2

Funksjoner og fordeler:

• Svært lav forsinkelse
• Avansert konfigurasjon og enhetsstatus gjennom intuitivt web-GUI
• Tallylys og kameramontering for live-produksjonsapplikasjoner
• HTTP-baserte API-er for tilpasset integrasjon
• Leverer Crestron-plugins
• Leverer Q-SYS-kontrollplugins

Spesifikasjoner:

Input Features

• Max video input: 2048x1200 60fps 4:4:4/4:2:2
• Input video at any format by custom EDID of input port
• Video formats: RGB, YUV BT.601/709/2020
• 8-channel HDMI-embedded audio
• HDMI interface: HDMI 1.4, DVI-D

NDI^® Encoding Features

Encoding Full NDI real-time stream at up to 2048x1200 60fps 4:2:2 8-bit.
Output the same resolution as input or any custom resolution. Typical outputs include:

• 2048x1080p/1920x1080p 23.98/24/25/29.97/30/50/59.94/60
• 1920x1080i 25/29.97/30/50/59.94/60
• 1280x720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
• 720x480p/720x480i 59.94/60/119.88/120
• 720x576p/720x576i 50/100

Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate.
Encoding 2-channel NDI-embedded audio.
Support NDI 6.2

Configuration Management

• Register with Magewell Cloud
• Remote control via WebUI and Magewell Cloud
• Provide comprehensive information regarding the device and input signals in real-time
• Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection
• Update firmware
• Support USB RNDIS/ECM
• Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
• Provide HTTP APIs

On-board Control Buttons
16 Position Rotary DIP Switch: set board-index from 0 to F

PTZ Control
Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
Mini-DIN–8 jack (shared with Tally light)

Network Interfaces
10/100/1000Mbps Ethernet
IEEE 802.3af PoE

USB Interface:
USB2.0 Type B
5V/2.1A power supply
USB RNDIS/ECM

Supported Products:
NDI Studio Monitor
OBS
vMix
Any other NDI-enabled product

LED Indicators:
Power supply: on/off
Input signal: locked/unlocked

Form Factor:
100.9smm (L) x 60.2mm (W) x 23.3mm (H)

Accessories:
USB 2.0 A to B cable
5V/2.1A power adaptor
Mini-DIN 8 breakout cable
Tally light
L-bracket

Screw Mounting Hole:
¼–20 threaded hole

Power Consumption
5V max current: ~1.5A
Max power consumption: ~6W

Working Environment:
Operating temperature: 0 to 40 deg C
Storage temperature: –20 to 70 deg C
Relative humidity: 5% to 90% non-condensing