Sony RM-IP10 Fjernkontrollpanel for PTZ kameraer VISCA IP

Control of up to 112 BRC cameras via an IP network

The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network, or 7 cameras over a traditional VISCA-controlled network. Up to 5 remote control panels can share control of the system.

Easy to install control for BRC-H900, BRC-Z330 and BRC-Z700 cameras

The RM-IP10 is compatible with Sony's BRC-X400^*1, SRG-X400^*1, SRG-X120^*1, BRC-X401^*1,*2, SRG-201M2^*1,*2, SRG-HD1M2^*1,*2, BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH and SRG-120DS camera models.
Control with BRC-H900 and older BRC-Z330 camera models requires installation of camera option board BRBK-IP10, and the BRC-Z700 camera is controlled when it is fitted with the BRBK-IP7Z option board. Easy and economical installation and set-up saves you time and cost.

*1 Requires firmware V2.17
*2 Model sold in China only

Features

Control of up to 112 BRC cameras via IP

The RM-IP10 remote control panel gives you control of up to 112 BRC cameras over an IP network.

Additional ability to use VISCA control

The RM-IP10 can also control up to 7 BRC cameras over a traditional VISCA (Video System Control Architecture) network.

Compatible Sony cameras

The RM-IP10 is compatible with Sony‘s BRC-X400, SRG-X400, SRG-X120, BRC-X401*, SRG-201M2*, SRG-HD1M2*, BRC-H900, BRC-H900, BRC-H800, BRC-X1000, SRG-300SE, SRG-300H, SRG-120DU, SRG-120DH and SRG-120DS cameras when they are fitted with the BRBK-IP10 option board, and the BRC-Z700 camera when it is fitted with the BRBK-IP7Z option board.

*Model sold in China only　

Simple RJ-45 (10Base-T/100Base-TX) connection for easy connection

The RM-IP10 links to an IP network with via a RJ-45 connector providing very easy, low cost and speedy installation.

PC configuration software supplied

The RM-IP10 provides for convenient configuration of system IPs and BRCs numbers, with location free configuration of anetwork.

Up to 5 controllers can operate on a single network

Up to 5 RM-IP10 control panels can be used on a single network allowing shared control and simultaneous multi-operator control of large camera systems.

Simultaneous Preset recall to all cameras under control

Instantaneous set-up of multiple cameras provides a big time saving for camera adjustments.

Specifications

Input/output connectors

• Control input/output

  VISCA RS-232C OUT Connector : Mini DIN 8pin type
  VISCA RS-422 connector: 9-pin type LAN : RJ-45, 10BASE-T/100BASE-TX automatically detected
  Tally In/Contact Out: 9-pin type

• Control signal format

  9,600 bps/38,400 bps (for RS-232C/RS-422 communication)
  VISCA over IP communication

• Power Connector

  JEITA type 4 (DC IN 12V)

General

• Input voltage

  12V DC (10.8 to 13.2V DC)

• Current consumption

  0.3A max. (at 12V DC), 3.6W

• Operating temperature

  0℃ to 40 ℃ (32°F to 104°F )

• Storage temperature

  -20℃ to 60 ℃ (-4°F to 140°F )

• Dimensions (W x H x D)

  391.3 mm x 165 mm x 145.9 mm
  (15 ½ inches x 6 ½ inches x 5 ¾ inches)

• Mass

  Approx. 950g (2 lb 15 oz)

User Interface

• Display

  No

• Speed Control

  No

• Zoom Seesaw Lever

  No

• Zoom Ring of Joystick

  Yes

• Zoom Control selectable

  Ring of Joystick

• ASSIGN button

  0

• Kensington lock hole

  No

Camera Control

• Maximum IP Connections

  112

• Maximum Serial Connections

  7

• Control Protocol

  VISCA over IP/VISCA RS-422/VISCA RS-232C switchable

• max Controller qty (/sys)

  5

Direct Function of Buttons/Knobs

• Exposure mode selection

  No

• One-push white balance auto adjustment

  No

• One-push black balance auto adjustment

  No

• Toggle color bars output on/off

  No

• Toggle backlight compensation on/off

  Yes

• Toggle flicker compensation on/off

  No

• Display the status of iris,gain,shutter speed and zoom position

  No

• R gain and B gain adjustment

  Yes *1

• R black and B black adjustment

  Yes *1

• Master black adjustment

  No

• Detail level display

  No

• Detail level adjustment

  No

• Knee point display

  No

• Knee point adjustment

  No

• AE level display

  No

• AE level adjustment

  No

• Iris setting display

  No

• Iris value adjustment

  Yes *1

• Gain setting display

  No

• Gain value adjustment

  Yes *1

• Shutter speed display

  No

• Shutter speed adjustment

  Yes *1

Supplied Accessories

• Supplied Accessories

  Operating Instructions (1)
  AC Power Adapter (SONY)(1)
  AC power cord (1)
  CD-ROM (1)
  RS-422 connector plug (attached to the unit) (2)

Notes

• *1

  Need multiple button/knob/DIP SW operation

• Available functions/specifications depend on camera specification